NORMS

Household and similar electrical appliances - Safety
Part 1: General requirements

Microline applications

Household and similar electrical appliances - Safety
Part 2: Particular requirements for commercial refrigerating appliances with an incorporated or remote refrigerant condensing unit or compressor

Microline applications

Household and similar electrical appliances - Safety
Part 2: Particular requirements for commercial electric cooking ranges, ovens, hobs and hob elements

Microline applications

High -voltage test techniques for low-voltage equipment
Part 2: Test equipment.
Applicable to the test equipment used for dielectric tests on low-voltage equipment. It covers tests with direct, alternating or impulse voltage, impulse current, and tests with a combination of impulse current.

Microline applications

Electrical and electronic measuring equipment
Documentation. Applies to the technical documentaion to be supplied with electrical and electronic measuring equipment for use in laboratories and for testing and servicing.

Microline applications

Medical electrical equipment
General requirements for safety.

Microline applications

Methods of measurement of touch current and protective conductor current
Defines measurement methods for d.c. or a.c. of sinusoidal or non-sinusoidal waveform, which could flow through the human body, and current flowing through a protective conductor. The measuring methods recommended for touch current are based upon the possible effects of current flowing through a human body. In this standard, measurements of current through networks representing the impedance of the human body are referred to as measurements of touch current.

Microline applicationse

Fire Hazard testing
Glowing/hot-wire based test methods - Glow-wire apparatus and common test procedure
Specifies the glow-wire apparatus and common test procedure to simulate the effect of thermal stresses which may be produced by heat sources such as glowing elements or overleaded resistors, for short periods, in order to assess the fire hazard by a simulation technique. The test described in this standard is applicable to electrotechnical equipment, its subassemblies and components, and may also be applied to solid electrical insulating materials or other solid combustible materials.

Microline applications

Safety of machinery - Electrical equipment of machines
Part 1: General requirements.
It applies to the application of electrical, electronic and programmable electronic equipment and systems to machines not portable by hand while working, including a group of machines working together in a co-ordinated manner.

Microline applications

Electrical apparatus for explosive gas atmospheres
CEI EN 60079-10: Classification of hazardous areas and installation requirements
CEI EN 60079-14: Electrical Installations in Hazardous Areas (Other Than Mines)
CEI EN 60079-17:Inspection and Maintenance of Electrical Installations in Hazardous Areas (Other Than Mines)
CEI EN 60079-26: Equipment with equipment protection level (EPL) Ga

Microline applications

Domestic cooking appliances burning gas
Part 1: Safety - General

Microline applications

Domestic cooking appliances burning gas
Part 2: Safety - Appliances having forced-convection ovens and/or grills

Microline applications

Gas-fired storage water heaters for the production of domestic hot water

Microline applications

Radiators and convectors
Part 1: Technical specifications and requirements

Microline applications

Radiators and convectors
Part 2: Test Methods and rating

Microline applications

Compressors and condensing units for refrigeration - Performance testing and test methods
Part 1: Refrigerant compressors

Microline applications

Compressors and condensing units for refrigeration - Performance testing and test methods
Part 2: Condensing units

Microline applications

Gas-fired domestic appliances producing hot water - Appliances not exceeding 70 kW heat input and 300 l water storage capacity
This document is applicable to gas-fired appliances producing domestic hot water. It applies to both instantaneous and storage appliances; water-heaters and combination boilers that have: - heat input not exceeding 70 kW; and - hot water storage capacity (if any) not exceeding 300 l. In the case of combination boilers, with or without storage, domestic hot water production is integrated or coupled,...
UNI EN 13203-1: Assessment of performance of hot water deliveries
UNI EN 13203-2: Assessment of energy consumption

Microline applications

Gas fired central heating boilers
Type C boilers of nominal heat input not exceeding 70 kW

Microline applications

Gas-fired central heating boilers
Type B boilers fitted with atmospheric burners of nominal heat input not exceeding 70 kW

Microline applications

Refrigerating systems and heat pumps - Safety and environmental requirements
Part 2: Design, construction, testing, marking and documentation

Microline applications

Heat exchangers - Forced convection air cooled refrigerant condensers
Test procedure for establishing performance

Microline applications

Heat exchangers
Test procedure for establishing the performance of forced convection unit air coolers for refrigeration

Microline applications

Methods of Testing for Rating Positive Displacement Refrigerant Compressors and Condensing Units

Microline applications

Css | Xhtml | Microline | Disclaimer